• WE SHIP WORLDWIDE!
  • WE SHIP WORLDWIDE    ★    EXPRESS SHIPPING     ★    VARIOUS PAYMENT OPTIONS
  • 0
  • 0
  • 0

Molotow - Premium Spray Paint 400ml - 172 Camouflage

Molotow Premium Sprühdosen 400ml in verschiedenen Farben 172 Camouflage

High quality spray paint from Molotow: does not only work for graffiti, but also for blaster art!

  • High-quality graffiti spray paint
  • Suitable for painting dart blaster
  • Content: 400ml
  • Odorless and better coverage than cheap spray cans
  • Made in Germany
show more
show less
Molotow Premium Sprühdosen 400ml in verschiedenen Farben 172 Camouflage
9,99 €
incl. VAT, excl. shipping
In Stock


Express delivery not available
Pay easy and secure
Product Information

Molotow Premium brings colour into life and on the Blaster

Performance tuning is one thing, but the gem should also be spiced up from the outside. Futuristic and brightly coloured for blaster wars, or rather covered for the next LARP event: there are actually no limits to creativity in optical modding.

In order to adapt the colours of Blaster to your own ideas, we offer a wide range of spray colours from Molotow.

Blaster art out of the can

The 400ml Molotow Premium spray cans are available in a whole range of different colours. All have the special Flowmaster™ spray valve, which allows clean paint application.

The Molotow Premium colours are Made in Germay quality, with good opacity, colour brilliance and product safety in mind. Molotow Premium Paints are ISO 9001 certified and REACH compliant and significantly less aggressive than cheap spray cans. Nevertheless, suitable protective clothing should be worn and good ventilation provided.

Painting tips

The first rule of the Blaster Painting Club is to sand. The second rule of the Blaster Painting Club is: sanding. Paint can adhere much better to a roughened and then cleaned surface. In order to increase the adhesion, a special primer can be applied before the actual layer of paint and finally a clear coat for sealing. We also offer primer and clear coat in our shop.

Whether or not Blaster should be disassembled before painting is the subject of numerous discussions. It is clear that all parts can be reached much better and the result is better. Since a optical mod is often preceded by a performance tuning, disassembling and assembling is usually a must anyway.

If you decide to paint your Blaster without disassembling it, you should at least remove moving parts like pump handles and carriages to reach the surfaces underneath. The barrels should also be sealed so that no spray paint can get into them. In front loaders in particular, it is otherwise possible for important parts to stick together inside.

A final tip for use: A lively paint finish can be achieved by first spraying the Blaster in one colour, then masking certain parts of the case with masking tape and newspaper (make sure that the masking tape is tightly adhered so that no paint can underrun) and then designing the other parts with a second colour. But you should take care not to spray the paint too thickly, otherwise many details may get lost.

show more
show less
Product details
  • 560366
  • Molotow Colors
    • Spray can 400ml Camouflage
  • Age recommendation: from 14 years
Attention! This product is not a toy. Keep out of children?s reach.
This could be of interest for you:
Molotow Yellow Fat Cap
Molotow Colors
Yellow Fat Cap
1,49 €
Molotow German Skinny Cap
Molotow Colors
German Skinny Cap
1,49 €
back to top