Blasterparts - Modification Kit for the Nerf N-Strike Snapfire - Tactical Range

All-inclusive Snapfire performance Modification Kit

The unmodified Nerf N-Strike Snapfire doesn’t necessarily satisfy regarding its performance, but it is a blaster we appreciate for its size and modding potential.

This Set does not only come with a severely beefed up Modification Spring for the Snapfire but also includes our specially developed Safety Trigger. Not only does it remove the need to modify the existing trigger to accommodate for the stronger spring, but also catches more securely and - through intelligent redesign - completely removes the possibility of catch failure while under tension.

Due to catch design the required force to pull the trigger is slightly increased.

Super easy installation

The Installation process can be split into two steps. First is swapping out the original spring for Blasterparts’ upgraded Modification Spring by unscrewing the four screws on the back of the blaster and removing the plunger head. Then exchange the springs, reinstall the plunger and you are ready for the next step.

If you now try to prime the Snapfire, you will notice the plunger will not catch. This is why the Blasterparts Safety Trigger is included. To exchange the standard trigger with the Blasterparts version, remove the pin hammering it out with a small screwdriver (make sure to have the display side up while hammering out the pin). The replacement trigger fits in the exact same way as the old one and is held in place by the same metal pin.