3D-printed rat skull for self-painting (7cm)

This 3D rat skull made of hard PLA is easy to paint for versatile use in LARP.

Head length: approx. 7cm
Widest head point: approx. 4cm

show less

★ Write the first review

8,99 €

incl. VAT, excl. shipping

BLACK WHITE METALLIC BONE-COLORED

In Stock

Amount

Add to wishlist (Login)

Product Information

This 7cm large rat skull made of 3D-printed PLA is interesting for all witches, shamans, or even orcs and undead in LARP. The unpainted skull can easily be painted as desired and thus becomes a unique eyecatcher for your attire. But also as a decorative object in the camp, the rat skull makes quite an impression.

You can simply drill through the eye sockets to, for example, attach the skull to a chain or a leather strap. Due to its hardness, it is also suitable as an ornament on armor.

The skull is naturally vegan and was printed completely without animal suffering. And it is much harder than a real skull and therefore not likely to break quickly. It is available in white, black, and metallic shimmer.

Steps for painting a bone-colored skull

1. Take sandpaper of a fine grade and lightly sand the skull, especially at the back of the head on the print support surface.
2. Prime the skull with some primer, this will weaken the print lines and make the paint adhere better.
3. Afterwards, prime the entire skull with a medium ochre or cream tone.
4. Mix the ochre with black or brown and paint the depths of the skull such as eye and nose sockets, also paint scratches or hard edges and furrows in the skull.
5. Mix an even darker tone and go even deeper into the darkest areas.
6. Take a lighter tone than the ochre and wipe off the paint before applying it to the high points of the skull. (Drybrushing)
7. Use pure black for the deepest holes in the skull and strong furrows.
8. Add some additional details until you are satisfied with the painting.
9. After drying, apply matte or clear varnish depending on the desired look, spray or paint the skull completely. This seals the paint and the skull is ready for use in LARP.

To be found in these categories

show less

Product details

Product Number:

302919

Material:

3D-printed Polylactic Acid (PLA)

Included in delivery:

Unpainted single-piece skull.
Without leather strap.

Manufacturer Information/Responsible for the EU

More from Andracor